FLASH PHOTOGRAPHY
Switch to flash photography if the
under-exposure warning LED lights up
while pressing the shutter release button
halfway (Fig. 18).
1. Set the Power/Flash Switch Lever to
the position to turn on the flash.
2. Make sure that the Flash Ready
Indicator is illuminated before taking a
picture (Fig. 19).
3. When the flash is no longer required,
be sure to slide back the lever to the ON
or OFF position (Fig. 20).
Daylight Flash Photography
If the main subject has less light falling
on it than the surrounding area and
background, underexposure of the main
subject will result. If such situations, use
the flash even in daylight.
NOTE:
* If you release the shutter
before the Flash Ready Indicator glows,
the exposure will not be correct.
