11
Reset switch
Reset switch
(behind the screw)
Remove the mounting
screw.
■ About reset switch
In case of an error, etc. at the LAN environment settings, the set values can be reset to the default
values as shipped from factory by removing the mounting screw and then pushing the reset switch.
Turn the power on while pushing the reset switch for 1 second continuously. Resetting to the
default values becomes effective (The violet monitor lamp flashes 2 times.) By re-power-on,
the set values are reset to the default values at the shipment from factory. Usually do not push
the reset switch.
[Factory Default settings]
Items
Specifications
IP address
192.168.1.254
Subnet mask
255.255.255.0
Gateway address
0.0.0.0 (Invalidation)
Sensor number
1
UDP port address
50828 (fixed) *1
Emissivity
1.00 (all pixels)
Alarm setting
Alarm invalid
*1
If you use UDP port on your PC and the UDP port address that you are using is
overlapping with this address, change the UDP address that you are using
.
[MEMO]