chinesport AV3 Series User And Maintenance Manual Download

Page: 6 / 47

CHINESPORT Spa – ITALIA

AV3

6/47

AV3 - User Manual rev.1.2 - EN.docx

Switch off the equipment by setting to “O” position the thermomagnetic
switch located on the tray (see “Stop functions” – electric models only).

Recharge batteries, if not used at all, at least every six months (see
“Recharging the equipment’s batteries” – electric models only).

If the equipment won’t be used for a long time it’s strictly recommended to
disconnect the batteries (please refer to non-routine maintenance)

1.7

Symbols

In this manual and the machine itself, the symbols are used to draw your attention
to important safety notices and useful information.
Observe all warning, attention and danger messages.

Symbol

Significance

Danger

Indicates an immediate danger with a high risk of death or serious
injuries, if it is not avoided.

Warning

Indicates a possible danger with a moderate risk of death or serious
injuries, if it is not avoided.

Attention

Indicates danger with a low risk of light injuries or damages to things,
if it is not avoided.

Class II device

Type B applied parts

Crushing/shearing hazard

xxxx

Compliance to 93/42/EEC and 47/2007/EC directives for medical
devices.
XXXX: Certification body identification number.

Carefully read the instructions in the use and maintenance manual

Warning of dangerous voltage, risk of electric shock

Fragile

Recyclable

Keep dry

Keep upright

Dispose correctly

Manufacturer

Summary of Contents for AV3 Series
















































Search results

Summary of Contents for AV3 Series

Reviews:

Related manuals for AV3 Series

Brands by name

Popular brands

chinesport AV3 Series, User And Maintenance Manual

Search results

Summary of Contents for AV3 Series

Reviews:

Related manuals for AV3 Series

Brands by name

Popular brands