20
(1) Call indoor unit from the outdoor station → pick up phone
(2) When it is calling, press “ Unlock ” button → hold for 5 seconds → it will show
“ L_ _ _ ” on the screen in outdoor station → enter unlock password.
(3) After entering, the outdoor station will sound “Di-Di-” to indicate the successful
setting.
(4) Operation of entering unlock password
press “
#
” → enter “ Room Number ” → enter “
#
” → enter unlock password (If the
operation is correct, it will show “
OPEN
”; If it is not, it will show “
Err5
” and exit
setting.)
6. ID/ IC Card
6.1 Initialization Setting:
Set two administrator cards.
Turn card reader off → put “ JUMP1 ” on position 12. → turn card reader on → the
code is “1234” and the green light is on. → Then swipe the 1st card (This card is
usually defined as “ The Add Card ”) until the red light is on. → Swipe the 2nd card
(This card is usually defined as “The Delete Card”) until it sounds “Bi-Bi-” → put
“ JUMP1 ” on position 13 and completing the setting.
JMP1
Normal
Initialization and management card setting
JMP2
Unlock time setting: 6s
Unlock time setting: 1s
P3
Connect infrared sensor
