Assembly
1. Loosen the screws that secure the blocks on the 1601601 Brackets.
With the pole holes pointed outward from the
fixture slide the metal bracket over the front of
extrusion on the Skypanel. This should hook in
between the front of the fixture, and the metal
extrusion. The metal blocks will then hook
around the rear of the extrusion. Tighten the
thumbscrews, ensuring the bracket is secure.
2. Next, insert the 4 poles into the Lightbank
body.
3. Insert the pole ends into the pole holes on the
16011601 Universal Brackets.
4. Attach the provided front diffusion to the Velcro on the front aperture
of the Lightbank. Your Chimera Lightbank is now set up and ready
for use!
Disassembly and Storage
Disassemble and re-pack the Chimera Skypanel Lightbank in reverse order
of assembly.
Make sure Lightbank and Brackets are
securely fastened with a safety bond to
the fixture to ensure safe operation.
