Pull the POP Bank over the front face of the
fixture. The POP Bank should sit just over the
lip of the fixture.
ASSEMBLY
Remove the POP Bank from its storage sack
and unfold until it takes a rectangular shape.
You should hear a POP! when the sides are
straightened. Pull the POP Bank over the front
face of the Nova P300c, taking care to observe
the ‘This Side Up’ label is placed on the upper/
top side of the POP Bank.
1
Run the attached hook-and-loop straps through
the D-ring on the bottom of the POP Bank.
Tighten until they sit flat against the rear of the
fixture.
4
Attach the supplied front diffusion screen and
your POP Bank is ready for use!
5
DISASSEMBLY AND STORAGE
Remove the POP Bank from the fixture by following the assembly
instructions in reverse. Refold by pushing the middle of each short
side inwards, flattening, then folding the entire POP Bank in half.
2
WARNING
FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS COULD
CREATE A HAZARDOUS CONDITION
»
This product is NOT intended for household use.
»
Do not leave unattended.
»
Use in a moderate temperature environment.
»
Open the flaps for ventilation as required.
»
Maximum lamp rating for this product is 2,000 watts.
Want more control?
Use our 3664ez 40 degree Soft
Egg Crate for best fit!
Be sure the web straps on each corner are
pulled close to the front of the fixture face as
shown in the image
3
