12
Getting Started
2.3 Desktop Stand of the Parent Unit
• The parent unit comes with a desktop stand attached to the back of
the parent unit.
• To place the parent unit on a desk, simply pull out the stand, as shown.
NOTE
Place the parent unit on a flat, even surface.
2.4 Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedures below:
• Press the
button and the menu bar will pop up.
• Press the
<
LEFT /
>
RIGHT buttons until
is highlighted, and the scan
, view
, add
, del
menus will pop up.
• Press the
<
LEFT /
>
RIGHT buttons to select add
and press the
OK
button to confirm.
• Camera
will pop up.
• Press the
<
LEFT /
>
RIGHT button to select the desired Camera and
press the
OK
button to start searching for a camera unit.
Note:
If a camera is currently paired with the Parent Unit, its
camera location (with a * against it) cannot be selected for a new
registration.
