12
MAINTENANCE OF YOUR CRIB/TODDLER BED/FULL SIZE HEADBOARD & FOOTBOARD:
Upon completion of the
assembly, check to ensure that all screws, bolts and fastening devices have been tightened securely. There should be a frequent check of
this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly and frequently during use.
DO
NOT
use crib if any parts are missing or broken. If any parts are missing or broken or you need assistance with assembly,
DO NOT
return
the product to your dealer. Call Foundations
®
for assistance at 877.716.2757 (U.S. Only) or 330.722.5033 (Monday through Friday, 9:00
a.m.– 4:00 p.m. Eastern Time) for replacement parts and instructional literature if needed. Include model identification numbers which you
recorded on page 2.
DO NOT
substitute parts.
CLEANING INSTRUCTIONS FOR YOUR CRIB/TODDLER BED/FULL SIZE HEADBOARD & FOOTBOARD:
Mix together a mild solution
of gentle dishwashing liquid and water, apply to surface using a soft clean cloth lightly dampened in the solution. Rinse with clear water
again using a soft clean cloth, then dry all surfaces thoroughly with a soft dry cloth.
NO ABRASIVE CLEANERS, SCOURING PADS,
STEEL WOOL, OR COARSE RAGS SHOULD BE USED TO CLEAN THIS FINE FURNITURE.
STORAGE AND USE OF YOUR CRIB/TODDLER BED/FULL SIZE HEADBOARD & FOOTBOARD:
A printed pouch is attached to the
crib spring for the permanent storage of the assembly directions. After completing the assembly process you are advised to read and be
aware of all
WARNINGS, CAUTIONS, CLEANING, STORAGE, USE AND MAINTENANCE
notices contained in this set of directions
and printed on the pouch located on the crib spring. You will then place the complete set of assembly directions into the pouch for future
referral. We caution you not to place excess hardware in the pouch as it could present danger to a child if retrieved. When storing crib use
CAUTION
as extreme temperature or humidity changes could be harmful. Use
CAUTION
when a vaporizer is in use, always aim vapor
stream away from crib as well as away from any wood furniture item.
CAUTION
•
ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 27 1/4 BY 51 5/8 IN. WITH A
THICKNESS NOT EXCEEDING 6 IN. IF YOUR CRIB IS DESIGNED TO CONVERT TO A
TODDLER BED, THE MATTRESS MUST BE AT LEAST 4 IN. (100 MM) THICK.
•
UPON COMPLETION OF ASSEMBLY BE SURE ALL SCREWS, BOLTS AND FASTENING
DEVICES HAVE BEEN TIGHTENED SECURELY. A FREQUENT CHECK SHOULD BE MADE
OF ALL SCREWS, BOLTS AND FASTENING DEVICES AND TIGHTEN IF NEEDED.
!