7
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Bassinet (continued)...
To assemble Changer...
6
1
2
Push down on the mattress pad to attach all the
fasteners.
Ensure the velcro is firmly into position.
Open the changer and place on a flat surface.
Assemble change table tubes ensuring the locking
button is pushed down and tubes click into place.
Your changer can be installed on either end of your
travel cot by simply sliding the slotted clips over the
fabric upper frame tube at one end of the travel cot.
Then clip the four base clips downwards on boh sides
of the travel cot.
6a.
6b.
1a.
1b.
2a.
2b.
THIS BASSINET SHOULD BE REMOVED BEFORE THE CHILD CAN SIT UP.
USE ONLY THE MATTRESS SUPPLIED BY THE MANUFACTURER.
INCORRECT MATTRESS CAN CAUSE DEATH.
NEVER PLACE A CHILD IN THE COT WHEN THE BASSINET IS IN PLACE.
WARNING
