8
Assembly / Operating Instructions
Attaching canopy
Stationary mode
1. Position the canopy over the top end of the bassinet (the
warning label end).
2. Push the canopy ratchets onto the frame on both sides of the
bassinet. Ensure canopy ratchets are attached through the slots
in the bassinet liner and there is no foam restricting them.
3.
Attach the press studs on each canopy flaps to the sides of the
bassinet liner.
4. Attach the velcro on the rear of canopy edge to the velcro strip
on the rear outer edge of bassinet top rail liner.
1. To convert bassinet to stationary mode; turn the dial on the
castor’s mould clockwise and wheel will lower down.
2. Repeat step 1 for remaining wheels.