10
ASSEMBLY / OPERATING INSTRUCTIONS
To operate Seat Height Adjustment continued...
To remove Seat Pad from Seat...
2
1
To adjust, remove the strap end from the current
height setting and re-secure in the higher
height setting.
Push the webbing inside the slot between
the height adjustment settings to ensure the
webbing is held well.
Repeat this step for the remaining 2 x seat strap
ends.
Remove the Seat from the Top Tray by pushing
the Seat out from the underside of the Tray.
Un-hook the Seat Pad from the hooks on the
Seat ring.
After washing, re-hook the Seat pad onto the
hooks of the Seat ring.
Re-insert Seat into the Seat hole in the Top Tray.
Push down until Seat is connected and secure.
Carefully check that Seat pad is correctly
secured to the Seat ring before placing child
into the Activity Centre.
2a.
2b.
1a.
1b.
1c.
1d.
1e.
1f.
NOTE: The child’s toes should touch the floor.
If your child’s feet don’t touch the floor, the
seat height setting is too high. If your child’s
feet are sitting flat on the floor, the seat height
setting is too low.
