H04760:03/09
2
s
teP
2 - D
iAgrAm
2: A
ttAcH
s
Pring
to
c
rib
Locate Crib Spring
K
with (4
)
Tabs. Refer to Diagram 2. Note:
Be sure top side of Crib Spring
K
is placed upward as illustrated.
Position the
(4)
Tabs attached to ends of Crib Spring
K
to mount to your selected position on Head/Foot Finish
I
posts. Select a posi-
tion and install
a Hexhead Machine Screw
D
through each of the
(4)
Crib Spring
K
Tabs and into a receiving hole in each post, then
tighten securely using 10 mm(3/8") wrench. When you decide on another placement of Crib Spring
K
you will need to remove the
(4)
Hexhead Machine Screws
D
with a 10 mm (3/8") wrench and relocate to another of the four positions.
Check Hexhead Machine Screws
D
periodically and tighten if needed.
To Relocate Crib Spring
K
, Remove Hexhead
Machine Screws
D
with Wrench and reposition.
Tab
RN
IN
G
Tab
Top surface of
Spring
K
Highest
position
D
Lowest
position
Top surface of Crib Spring
K
Note: Text on pouch
will be visible from top
surface.
Place the (8) Insert Nuts
C
into their holes in the corner
posts of Head/Foot Finishes
J
as shown. Align the holes
in an end rail of a Stationary Side
I
with the holes in a
Head/Foot Finish
J
. Insert Allenhead Bolts
A
through the
end rail on Stationary Side
I
, then tighten into Insert Nuts
C
in Head/Foot Finish
J
by using the two Allen Wrenches
B
. DO NOT OVERTIGHTEN. Repeat this process at the
other three corner posts.
s
teP
1 - D
iAgrAm
1: A
ttAcH
s
tAtionAry
s
iDe
S
to
F
ootboArD
/H
eADboArD
I
B
A
C
C
B
C
Large overhang
goes toward
outside of crib.
J
P
rePArAtion
Carefully remove and lay out all hardware and parts. During the assembly process, when using screws or bolts (fastening devices),
check each with
P
Arts
e
ncloseD
in
H
ArDwAre
b
Ag
list by letter and size. Identify by placing each fastening device on the diagram of
the item (sketched actual size). Be sure to use the proper size specified in the assembly directions. Hardware Bag may contain extra
fastening devices. Check quantities and match to
P
Arts
e
ncloseD
in
H
ArDwAre
b
Ag
/c
Arton
lists.
If a part is missing or broken, DO NOT
return the product to your dealer. Call Foundations
®
for assistance at 1 877.716.2757 (U.S. Only) or +1 330.722.5033 (Monday through
Friday, 9:00 a.m.– 4:00 p.m. Eastern Time). Before making this contact identify your crib. Model Identification numbers are stamped on a
label attached to the inside face of a Head/Foot Finish
J
bottom rail. Record the complete model identification number now: Include this
number with a request for a part or literature for your crib.
Do not sUbstitUte PArts!
#____________________.
This crib conforms to applicable regulations promulgated by the
CONSUMER PRODUCT SAFETY COMMISSION
and the
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) Voluntary Standard
in effect at the date of manufacture
and is certified by
JUVENILE PRODUCTS MANUFACTURERS ASSOCIATION (JPMA)
and
ASTM.
