CHIKO AIRTEC CHP-5000AT3-DSA-UD, Instruction Manual

Page: 53 / 77

Chapter 3 Operation
CMN015-005
原本
(Original instructions) 49
3.1.2
Wiring and Piping
■
Wiring
WARNING
•
Perform wiring firmly, without bending or pulling cables with excessive
force.
Fire or electric shock may result.
•
Ensure that the power supply conforms to the specifications of the device.
•
Be sure to connect the ground wire.
CAUTION
•
Avoid multiple connections as they can cause voltage reduction.
At reduced voltage, the device may fail to operate normally, resulting in
failure.
The device is powered by three-phase supply.
The tolerance of the supply voltage is

10%.
1.
Remove the power terminal block BOX
lid
by extracting its screws.
2.
Connect the power cable to the power
terminal block of the unit.
3.
Connect the power supply end of the power cable to the power outlet.