chiefs ST164 Manual Download Page 1

 

 

 

ABN 23 604 979 688 Nerta QLD Pty Ltd t/as Chiefs Australia

 

 

P:

    07 5493 8868 

M:

   0476 350 552 

A:

    3/6 Textile Avenue Warana QLD 4575  

E:

     [email protected] 

chiefsaustralia.com 

  

  

 

 

 
 

ST164 Two Way Chemical Injector 

 

 

 

The ST164 is a manual, two chemical dispensing unit, specifically designed for use with Nerta and Chiefs touchless 
cleaning products. 
 
Most fleets generally have a variety of vehicles that require more than one cleaning product. The ST164 can dispense 
and automatically dilute up to two chemicals, pre-set at the correct ratios (from 100:1 to a maximum of 10:1) 
 
The ST164 is designed to work under high pressure and is connected to the wash bay pressure cleaner(s). It can 
dispense both foaming single step products and low and high PH dual products, under high pressure. 
The ST164 is made by RM Suttner in Germany. It will cope with harsh wash bay conditions and is safe to use with 
both low and high pH water soluble products. 
 
The ST164 is supplied with a number of standard accessories, dependent on the wash bay and chemical 
requirements, which are listed in the following section. 
 
In addition to the standard accessories, there may be a requirement for additional equipment such as hose reels, 
high pressure hose, fittings etc. This will be discussed and documented on a site visit with your Chiefs representative. 
The ST164 is setup at our factory to match the specifications of the pressure cleaner.  The chemical injector in ST164 
relies on the pressure rating (psi) and the flow rate (lpm) to operate correctly and perform to maximum efficiency. 

Summary of Contents for ST164











Reviews: