background image

Installation Instructions

XVM1X1U

7

Figure 8

4

3

3

4

4

4

3

3

(L) x 2

(D) x 2

CENTER DISPLAY
ON CART TO
AVOID TIPPING!

CENTER DISPLAY
ON CART TO
AVOID TIPPING!

WARNING:

Exceeding the weight capacity can result in

serious personal injury or damage to equipment!  It is the
installer’s responsibility to make sure the combined weight of
display and attached accessories mounted to the XVM1X1U
mount does not exceed 500 lbs (226.8 kg).

WARNING:

DISPLAY MAY WEIGH IN EXCESS OF 40

LBS! Always use two people and proper lifting techniques
when installing or positioning display on cart!

3.

Hang interface brackets (L) to center of mounting rails (D).
(See Figure 8)

WARNING:

 FAILING TO CENTER DISPLAY ON

XVM1X1U CART MAY CAUSE THE MOUNT TO TIP OVER
WHICH COULD RESULT IN SERIOUS PERSONAL INJURY
OR DAMAGE TO EQUIPMENT! Always install display onto
the center of the cart!

4.

Lift locking brackets on interface brackets (L) up to the back
of mounting rails (D). (See Figure 8)

5.

Use four 5/16-18 x 2 1/2" button head cap screws (Z) to
secure interface brackets (L) to rails.  (See Figure 9)

Figure 9

5

(Z) x 4

Summary of Contents for XVM1X1U













Reviews: