manualshive.com logo in svg

CHIEF XVM1U, Installation Instructions Manual, Page: 11 / 12

Share
Download
CHIEF XVM1U Installation Instructions Manual Download Page 11

Installation Instructions

XVM1U

11

Cable Management

1.

Route cables from display through nearest holes on front of
columns and out through back cable management hole.
(See Figure 16)

NOTE:

For best access, route display cables through columns
prior to display installation. See Display Installation
section for details.

Figure 16

Additional Cable Management Options

2.

Cables may be routed through tops of columns and out
through the back cable management hole. (See Figure 17)

Figure 17

3.

If rails needed to be installed on top of cable management
holes, cables may be routed through quick connect bases
(Q) prior to the rails being installed. (See Figure 18)

4.

Install rails according to Rails Installation section making
sure cable is routed through cable opening on quick
connect base (Q). (See Figure 18)

Figure 18

5.

For any cable management holes that are not used, snap
covers (MM) may be used to cover holes as desired. (See
Figure 19)

Figure 19

(display not shown for clarity)

1

1

1

1

2

2

cable from uninstalled

display

3

4

(MM)

5

Summary of Contents for XVM1U













Reviews:

No comments