XVAU
Installation Instructions
14
7.
Remove screws, washers and bracket from door handle.
(See Figure 28)
8.
Flip the door handle. (See Figure 28)
Figure 28
9.
Reattach removed screws, washers and bracket to handle.
(See Figure 29)
10. Loosen the locking cam screw. (See Figure 29)
11. Flip the locking cam tab to the side nearest the edge of the
door. (See Figure 29)
12. Tighten the locking cam screw. (See Figure 29)
Figure 29
Rear Cover Removal
NOTE:
The upper rear cover will need to be removed to route
cables from display. The lower rear cover may also
need to be removed depending on the application.
13. Remove four screws securing upper rear cover to cart
assembly. (See Figure 30)
14. Remove four screws securing lower rear cover to cart
assembly. (See Figure 30)
Figure 30
15. Unlatch tabs on one edge of upper rear cover and carefully
pull cover away from column. (See Figure 31)
16. Unlatch tabs on one edge of lower rear cover and carefully
pull cover away from column. (See Figure 31)
Figure 31
x 2
7
8
8
10
x 2
9
11
12
1
x 4
2
x 4
3
3
3
4
