Installation Instructions
WMA2S
15
2.
Install eight #8-32 x 1/2" button head security screws (M)
into holes in wall bracket covers. (See Figure 34)
Figure 34
3.
Remove two #8-32 x 1/2" Phillips pan machine screws (T)
holding mount covers on WMA2S arm. (See Figure 35)
4.
Install two #8-32 x 1/2" button head security screws (M) into
holes on mount covers. (See Figure 35)
Figure 35
5.
Remove two bolts holding stop bracket in place on
underside of short throw projector mount. (See Figure 36)
Figure 36
6.
Install two 1/4-20 x 1/2" button head security screws (T)
through holes in stop bracket and into holes in sliding nuts.
(See Figure 37)
Figure 37
7.
(Optional)
Remove column from WMA2S according to
column installation instructions.
NOTE:
For ease of installation, it is recommended to remove
column prior to performing the following steps. For
most mounts, it will be necessary to remove column
prior to install of four security screws to WMA2S.
2
(M) x 8
(Mount accessory arm not shown for clarity)
4
3
(T) x 2
(M) x 2
x 2
5
Stop bracket
6
(T) x 2
Stop
bracket
Sliding nuts
locations
