2.
Securely anchor plasma mount to the wall using wall studs or supporting framework (see Figure 4). The small
center hole can be used to lightly hold the mount in place while marking drill hole locations.
3.
Make sure the flag is lowered to the side before attempting to place the display on the mount (See
Figure 5).
4.
With the aid of another person, lift the display up to the mount, align the mounting buttons on the display with the
teardrop slots in the mount, and set the display into place.
Position (raise) the flag
to secure the display (See
Figure 6)
5.
Set mount to desired tilt and tighten nuts, a 1/2” wrench required (See Figure 7).
Align Mounting
Buttons with
Teardrop Slots
Anchor to wall
using four slots
Figure 4
Figure 5
Figure 6
Figure 7
