PSMH2685
Installation Instructions
6
Display Installation
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
MOUNT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! DO NOT substitute
hardware.
1.
Move two security latches on mount to the OPEN position.
(See Figure 5)
Figure 5
2.
Install four mounting buttons (D) onto display using four
M16 x 65mm socket head screws (G). Install screws into
narrower end of mounting button. (See Figure 6)
Figure 6
3.
Lift display following lifting instructions provided by display
manufacturer.
4.
Align mounting buttons on display with teardrop mounting
holes in mount. (See Figure 7)
5.
Move display forward until recessed area of mounting
buttons is positioned over lower area of teardrop mounting
holes. (See Figure 7)
6.
Lower display until recessed area of mounting buttons is
seated in lower area of teardrop mounting holes.
(See Figure 7)
Figure 7
7.
Move two security latches to Closed position and lock if
desired. (See Figure 8)
Figure 8
8.
Route wires and cables to display.
OPEN
1
Security
Latch
2
(G) x 4
(D)
4
3
6
CLOSE
7
Security
Latch
Padlock or Bolt Here
(not included)
