INSTALLATION INSTRUCTIONS
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email:
PN: 8805-000020 Rev. B
Figure 2
PSMH-2046
PLASMA DISPLAY STATIC MOUNT
(4) PSM-2042 Static Wall Mount for 42” NEC
(4) PAC-126 36” Lateral Shift Accessory
PSM-2042 (each)
(1) Plasma Static Mount
(1) 10-24 x .5 FH Undercut Screw
(1) Latching Flag
(1) 10-24 Nylock Nut
(8) Mounting Buttons-Yellow
(8) M4 x 25mm Phillips Head Cap Screws
(1) Nylon Washer
PAC-126 (each)
(2) Lateral Shift Extrusion
(4) Hex Nut, 5/16-18
(4) Washer, 5/16
(4) T-slot Nut, 5/16-18
(4) Lock Washer, 5/16
(4) Panhead Screw, self tapping #8 x .25
(4) Threaded Stud, 5/16-18
BEFORE PROCEEDING:
Unpack each carton; verify contents shown
in Figure 1. If you are missing any of the listed components, please contact
Customer Service at 1-800/582-6480. Disregard individual installation
instructions in PSM-2042s and PAC-126s. Follow this instruction manual for
installation of PSM-2046 for your NEC 84” screen array.
PLASMA DISPLAYS ARE EXTREMELY FRAGILE.
WARNING!
For each of your NEC 42” Plasma Displays.
1. Attach latching flag to PSM (see Figure 2) and tighten the nut and screw until friction will hold the flag
in place.
2. Attach mounting buttons to display using one Phillips head screw per mounting button (see Figure 3).
CAUTION!
Figure 1
Your mounting structure must be capable of supporting 4
times the weight of the plasma and the mount.
Figure 3
