I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480
952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PKWY, STE. 700
SAVAGE, MINNESOTA 55378 USA
8804-000238 R
evC
2005 Chief Manufacturing
www.chiefmfg.com
10/05
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
MOUNT IS 175 POUNDS (79.38 KG).
PSB-2064-2065-2066-2067
DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(2) Side Interface Bracket
(2) Top/Bottom Bracket
(4) Mounting Buttons-10-24 Tapped
(8) 10-24 Button Head Cap Screws
(4) M5 x 30 mm Phillips Head Cap Screw
(4) M5 x 45mm Phillips Head Cap Screw
(8) .68 x .39 x .625 Nylon Spacer
(1) 1/8” Allen Key
(1) T25 Torx Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
DISPLAYS ARE EXTREMELY FRAGILE.
1. If applicable, remove existing mounting buttons on back of display using the T25 Torx key.
2. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button,
with chamfered hole of mounting button (larger surface) facing bracket, to top and bottom brackets
(four places) (see Figure 2 & Figure 3).
CAUTION!
Figure 1
WARNING!
Figure 2
Figure 3
