2. Using four 10-24 button head cap screws, attach top and bottom to side brackets (see Figure 4 &
Figure 5).
3.
Attach the mounting brackets to the display using M8 x 35mm screws (see Figure 6 & Figure 7). Be
sure not to over tighten screws, because doing so can damage the display.
4.
With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting
brackets with slots in the Chief Mount.
5. Lower safety latch on the Chief Mount to secure your display, making sure latch is completely
engaged.
Figure 4
Figure 5
Figure 6
Figure 7
