2. Using four 10-24 button head cap screws, attach top and bottom to side brackets (see Figure 4 & Figure 5).
3. Place Nylon spacers over mounting holes on back of screen. Attach mounting brackets to display using the M8
screws (see Figure 6 & Figure 7). If a video board is attached to the back of the display, stack two black Nylon
spacers and attach bracket using the M8 x 60mm screws.
4.
With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting brackets
with slots in the Chief Mount.
5. Lower safety latch on the Chief Mount to secure your display, making sure latch is completely engaged.
Figure 5
Figure 7
Figure 6
If video board is attached
to back of display, stack two black
nylon spacers and attach bracket
using M8 x 60mm screws.
Figure 4
