Installation Instructions
PAC511
7
3.
Secure accessory to box using Phillips screwdriver and as
many 1/8-18 x 3/4" mounting screws (E) as required.
(See Figure 5)
NOTE:
The top and bottom slots in the side flanges of PAC511
are designed to fall at the center of the studs on 16"
centers. When installing a mount over the top of
PAC511, align mounting holes in mount with top and
bottom slots in side flanges and secure using hardware
specified in the Installation Instructions provided with
the mount.
4.
Use the wire tie clips (C), as necessary, for cable
management. (See Figure 5)
Figure 5
(E) (8 provided)
3
(C)
(Mount shown
as example only)
