I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480
952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8832-000241
2007 Chief Manufacturing
www.chiefmfg.com
08/07
BEFORE YOU BEGIN
Horizontal Array Pole Clamp
Model: MSP-WTIKTA220
The WTIKTA220 pivot array allow horizontal (yaw),
vertical (pitch), and roll display adjustment. The pitch
adjustment range is 30° (15° up / 15° down). The mount
will pivot nearly full circle, depending on the mounting
base.
The mount is designed to mount two or three 17"
displays.
The mount accommodates standard VESA® 75mm/
100mm compliant displays.
CAUTION:
To prevent damage to your display, which could affect or void the Factory warranty, thoroughly study all
instructions and illustrations before you begin to install the mount. Pay particular attention to the "Important Warnings
and Cautions" on Page 2.
CAUTION:
The combined weight of the display(s) installed must not exceed 34 lbs (15.4 kg).
•
Pay particular attention to the Weight Specifications detailed on page 2.
•
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.
