MSP-WRTIDSKY1 Light Weight
Suspended Ceiling Kit for use with
Island Display Skybox
The MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit
provides a sturdy support for LCD displays when installing
these products in a suspended ceiling.
The Kit includes two spanning plates that will be suspended by
four tie wires from the true ceiling above the suspended ceiling
tiles. Turnbuckles allow the installation to be fine-tuned.
The reinforcing plate can be installed anywhere above a
2’ x 2’ (600 X 600mm) or 2’ x 4’ (600 X 1200mm) ceiling tile.
BEFORE YOU BEGIN
•
CAUTION: To prevent damage to the Kit, which could affect or void the Factory warranty, and to the equipment that
will be attached to it, thoroughly study all instructions and illustrations before you begin the installation. Pay particu-
lar attention to the “Important Precautions” on Page 1.
• The maximum weight to be installed on the MSP-WRTIDSKY1 is 40 pounds (18.14 Kg).
• The spanning brackets are designed to fit above a conventional suspended ceiling system.
• If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.
CHIEF MANUFACTURING INC.
1-800-582-6480
952-894-6280 FAX 952-894-6918
12800 HIGHWAY 13 SOUTH, SUITE 500
SAVAGE, MINNESOTA 55378 USA
PART NO. 8810-000010 (Rev. A)
2004 Chief Manufacturing
www.chiefmfg.com
Printed in USA 02-04
I N S T A L L A T I O N I N S T R U C T I O N S
