Installation Instructions
MSP-SONMED1
3
TOOLS / PARTS FOR INSTALLATION
3/8-16 x 1"
5/32"
5/32"
(included)
3/16"
(included)
7/32"
(included)
A (1)
B (1)
C (10)
D (1)
E (1)
F (1)
G (2)
5/16-18 x 3/8"
J (1)
3/16"
K (1)
H (1)
5/32"
7/32"
3/8-16 x 1"
Assembly
1.
Attach rubber bumpers (C) to underside of base (D).
2.
Attach pole mount (B) to base (D) using one 3/8-16 x 1" flat
head screw (F), following instructions included with the base
and pole kits.
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! DO NOT substitute
hardware! Use only hardware provided by manufacturer.
3.
Slide Centris head assembly (H) onto pole mount.
4.
Tighten head assembly to pole using two 5/16-18 x 3/8" set
screws (G). (See Figure 1)
5.
Attach display to head assembly following instructions
included with display.
Cable Management
1.
Connect cables to display.
2.
Route cables from display and down pole, using cable
sheath (A) and following instructions included with pole kit.
Figure 1
(H)
(B)
(G) x 2
3
4
