Installation Instructions
MSBV
5
Guidelines for Using Spacers (if required)
If the display has a recessed mounting surface, protrusions or a
power box, a spacer must be placed between the display and
MSBV bracket (A) and longer mounting hardware must be
used. (See Figure 1)
Figure 1
IMPORTANT ! :
Proceed to the correct procedure for
installation of MSBV based upon the display’s mounting
pattern.
INSTALLATION
WARNING:
IMPROPER INSTALLATION CAN LEAD TO
DISPLAY FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Using screws of
improper size may damage your display. Properly sized
screws will easily and completely thread into display
mounting holes. If spacers are required, be sure to use longer
screws of the same diameter.
100 x 100mm Pattern
1.
Select
four
properly sized M4 screws from Bag A.
2.
Attach the MSBV bracket (A) using the hole pattern on back
of display and holes noted at "X". (See Figure 2)
3.
To prevent equipment damage, do not over-tighten the
screws into the display.
Figure 2
200 x 100mm Pattern
1.
Select
six
properly sized M4 screws from Bag A.
2.
Attach the MSBV bracket (A) using the hole pattern on back
of display and holes noted at "X". (See Figure 3)
3.
To prevent equipment damage, do not over-tighten the
screws into the display.
Figure 3
Attaching to display with
protrusions, recessed
mounting surface, or a
power box.
(L)
Attaching to display with
NO protrusions, recessed
mounting surface, nor a
power box.
Long screw from
Bags A, B or C
Short screw from
Bags A or B
(A)
X
X
X
X
Attach MSBV using fasteners at
"X"
X
X
X
X
Attach MSBV using fasteners at
"X"
X
X
