LWM2X1UP / LWM3X1UP
Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively “Milestone”), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION:
A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING:
Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all parts are properly
assembled and installed using the instructions provided.
WARNING:
Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system.
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all parts located within the mounting system of the
LWM2X1UP / LWM3X1UP mounts does not exceed
maximum weights noted in table below.
WARNING:
Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING:
Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING:
Do not use this product outdoors.
IMPORTANT ! :
The LWM2X1UP / LWM3X1UP mounts are
designed to be mounted to a 2" x 4" wood studs (16" on center)
wall; or a bare 8" concrete wall. The mounts are designed to
accept displays in the 40-55" (1016-1397mm) size.
--SAVE THESE INSTRUCTIONS--
MODEL
Max Weight
Allowed for EACH
Display
Max Weight
Capacity of
Mounting System
LWM2X1UP
125 lbs
(56.7 kg)
250 lbs
(113.4 kg)
LWM3X1UP
125 lbs
(56.7 kg)
375 lbs
(170.1 kg)
LWM2X1UP
LWM3X1UP
125 lbs 125 lbs
125 lbs 125 lbs 125 lbs
