LTTU
Installation Instructions
6
Assembly And Installation
Wall Plate Installation Using Wood Studs
1.
Determine location for mount keeping in mind display size
and safety requirements.
2.
Use stud finder to locate studs. Wall plate can be mounted
on 2" x 4" wood studs either 16", 20" or 24" apart for double-
stud mounting. For triple-stud mounting, studs must be 16"
apart.
3.
Remove and discard two plastic shipping parts from the wall
plate (one from each end). (See Figure 1)
Figure 1
4.
Using wall plate as template, mark and then drill four or six
(for triple-stud mounting) 3/16" diameter pilot holes through
mounting surface making sure the holes are centered in the
middle of each stud. Holes must be drilled at least 2-1/4"
deep. (See Figure 1)
5.
Install four or six connector screws (D) through wall plate
and into pilot holes using M4 Allen Head bit (CC). (See
Figure 1)
Figure 2
Front of
wall plate
3
shipping
part
(double-stud mounting with studs 20" apart shown)
x 4
4
x 4
5
(D) x 4
holes for 16" studs
holes for 24" studs
(triple-stud mounting)
x 6
4
x 6
5
(D) x 6