Installation Instructions
KTC SERIES
11
Mount Assembly
KTC-230 Assembly
1.
Place front pole clamp with Centris Head (C) against pole
(G) in approximate mounting location.
2.
Place three 1/4-20 X 1 1/4" button head cap screws (V) into
rear pole clamp (N) and place against pole aligning with
front pole clamp on Centris Head (C). (See Figure 4)
Figure 4
3.
Equally tighten screws (V) against front pole mount and the
rear pole clamp (N). (See Figure 5)
Figure 5
4.
Secure rear pole clamp (N) to Centris head’s front pole
mount (C) and pole (G) by tightening three button head cap
screws (V) using 5/32" hex key (J). (See Figure 4)
5.
Repeat steps 1-4 for additional Centris head.
6.
Add pipe cap (Y) to top of pole (F or G).
KTC-220, 225, 320, 325, 330, 440 and 445 Assembly
1.
Assemble pole clamp back (M) to pole mount front using
two washers (X) and two 1/4-20 x 3/4" button head cap
screws (U) using a 5/32" hex key (J). (See Figure 6)
2.
Secure pole mount back (M) to pole mount front and pole by
tightening two button head cap screws (U) using a 5/32" hex
key (J).
3.
Repeat steps 1-2 for additional array mount on KTC-330,
440 and 445.
4.
Add pipe cap (Y) to top of pole (F or G).
Figure 6
Display Installation
Attach Centris Head to Flush Mount Display
CAUTION:
If display uses a screw size other than those
included in the kit, DO NOT use the screws provided. Using
the wrong screws could result in damage to your monitor.
1.
Install two M4 x 12mm Phillips pan head screws (P) into two
upper mounting holes in display back using #2 Phillips
screwdriver. (See Figure 7)
NOTE:
DO NOT fully tighten at this time.
2.
Hang display on Centris head. (See Figure 8)
3.
Install bottom two M4 x 12mm Phillips pan head screws (P)
through Centris head mounting holes and into lower
mounting holes in display back.
4.
Tighten ALL four M4 x 12mm Phillips pan head screws (P).
(See Figure 9)
(C) x 1
(G) x 1
(N) x 1
(V) x 3
2
(V) x 3
Keep equal
distance between
mount and
clamp when
tightening
(C)
(N)
1
(M) x 1
(X) x 2
(U) x 2
Pole Mount front
with Array
