KRA232/233
Installation Instructions
6
INSTALLATION
NOTE:
The KRA232B and KRA233B thin client mounts are
compatible with the Kontour™ column mounts only.
Proceed to "
Installation to Pole
" Section for
KRA232PB or KRA233PB installation.
Installation to Column (KRA232B/233B)
1.
Loosely attach thin client bracket (E) to column brace (H)
and column guide (J) using two #10-24 x 1/2" button head
cap screws (A). (See Figure 1)
Figure 1
NOTE:
Thin client bracket (E) may be offset to either side by
using side holes. (See Figure 2)
Figure 2
2.
Remove column cap from Kontour column. (See Figure 3)
3.
Slide column guide (J) into column channel. (See Figure 3)
Figure 3
4.
Tighten two #10-24 x 1/2" button head cap screws (A) when
desired height it reached. (See Figure 4)
5.
Re-install column cap to column. (See Figure 4)
Figure 4
6.
Proceed to
"Thin Client Installation"
Section.
1
(E)
(H)
(J)
(A) x 2
1
(E)
(H)
(J)
(A) x 2
holes for left offset
(right offset shown)
(J)
2
3
(A) x 2
5
4
