Installation Instructions
KRA209/KRA210
7
Adjustments
NOTE:
These installation instructions only cover adjustments
specific to the KRA209/210 extension arms. Refer to
K1 Series Installation Instructions of additional
adjustment options available with K1 Series mounts.
Height Adjustment
1.
Loosen height adjustment knobs on KRA209/210 mount by
turning knobs counter-clockwise. (See Figure 5)
2.
Adjust mount to desired mounting height. (See Figure 5)
3.
Tighten height adjustment knobs on KRA209/210 mount by
turning knobs clockwise. (See Figure 5)
Figure 5
Pivot Adjustment
1.
Adjust pivot position as desired.
2.
Use 3/16" hex key (B) to adjust pivot point tension screws to
change pivot adjustment tension. (See Figure 6)
Figure 6
1
2
3
2
(KRA209 shown)
KRA209
KRA210
pivot adjustment
tension screws
