Installation Instructions
K1 Series
9
Assembly And Installation
Connecting K1C Series (column mount) to Desk
Standard Installation
1.
Loosen clamp screw until enough space is created between
clamp and mount to allow for desk mounting.(See Figure 1)
NOTE:
If space is limited behind desk (i.e. against wall, etc.),
remove clamp screw and attachment entirely and
reattach clamp screw prior to Step 3! (See Figure 2)
2.
Place mount on top of desk at desired mounting location.
(See Figure 1)
3.
Tighten clamp using clamp screw until mount is securely
fastened to desk. (See Figure 1)
Figure 1
Figure 2
Low Profile Installation (K1C Series Only)
1.
Remove top cap from column. (See Figure 3)
2.
Slide mount assembly off of column. (See Figure 3)
Figure 3
3.
Rotate mount in 90 degrees in either direction prior to
reinstalling onto column. (See Figure 4)
4.
Reinstall onto column and adjust to desired height. (See
Figure 4)
5.
Reinstall top cap to column. (See Figure 4)
Figure 4
6.
Proceed with standard installation to desk as shown in
"Standard Installation" section.
1
2
3
desk
1
2
3
4
5
