FSBIB/FSBI2B
Installation Instructions
4
ASSEMBLY AND INSTALLATION
NOTE:
The FSBIB adapter is compatible with first generation
iPad™ alone, not mounted in a case. The FSBI2B
adapter is compatible with the second generation
iPad™ (iPad 2™) alone, not mounted in a case.
NOTE:
Mounts directly to any 100mm x 100mm (maximum)
faceplate or can be mounted using mounting buttons.
Attach Directly to Faceplate
1.
Secure iPad™ adapter (A) to mount by installing four
M4x12mm Phillips flat head screws (D) through four holes
on adapter (A), four mounting holes on mounting head and
into four M4 hex nuts (B). (See Figure 1)
Figure 1
Attach Using Mounting Buttons
1.
Secure four mounting buttons (included with mount) to
iPad™ adapter (A) by installing four M4x20mm Phillips flat
head screws (C) through four holes on adapter (A), four
mounting buttons and into four M4 hex nuts (B). (See Figure
2)
Figure 2
2.
Use mounting buttons to attach iPad™ adapter to mount
following the mount’s installation instructions.
1
(D) x 4
(A)
mounting head (example)
(B) x 4
1
(C) x 4
(A)
mounting buttons x 4
(B) x 4
