Installation Instructions
FSB1U
7
2.
Align two mounting screws with upper teardrop mounting
holes in Centris head. (See Figure 7)
3.
Insert two upper mounting screws into upper teardrop
mounting holes in Centris head, and lower display until
mounting screws are fully seated in lower area of teardrop
mounting holes. (See Figure 7)
NOTE:
DO NOT
fully tighten mounting screws at this time.
Figure 7
4.
Insert two lower mounting screws into lower teardrop
mounting holes in Centris head. (See Figure 8)
Figure 8
5.
Fully tighten four mounting screws.
(F)
Centris Head
3
2
NOTE: Display not shown
4
(CA-EB) x 2
NOTE: Display not shown
