Page 2
Interface installation
2a. If using with any small flat screen system using Chief Manufacturing’s Q2 (5” x 5”) mounting system.
1. Assemble (4) mounting buttons to 5” (outer holes) pattern on the adapter brackets using (4) 10-24 x .625”
Phillips pan head screws as shown in Figure 4.
2. Secure brackets together with (4) M4 X 6mm Phillips Pan Head Screws. See Figure 4.
3. Secure adapter bracket to any mounting device using Chief Manufacturing’s Q2 (5” x 5”) mounting system.
2b. Optional VESA Mounting
1. Assemble (4) 10-24 x .25” Phillips Pan Head Screws to 5” (outer holes) pattern on the adapter brackets as shown
in Figure 5.
2. Using four inside tapped holes of interface bracket and M4 x 8mm Phillips Screws (provided), secure adapter
bracket to any mounting device using a 100mm x 100mm VESA pattern.
Figure 4
Figure 5
