![background image](http://html.mh-extra.com/html/chief/fsb-018/fsb-018_installation-instructions_2601117001.webp)
I N S T A L L A T I O N I N S T R U C T I O N S
Chief Manufacturing, a products division
of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
P: 800.582.6480 / 952.894.6280 F: 877.894.6918 952.894.6918
8804-002002 Rev00
©2009 Milestone AV Technologies, a
Duchossois Group Company
www.chiefmfg.com
04/09
FSB-018
FLAT SCREEN TABLE STAND
The Flat Screen Table Stand is designed to attach directly to VESA FDMI standard 75mm or
100mm mounting pattern.
(1) FSB-018 Stand Assembly
(4) M4 x 10mm Phillips Head Screw
(1) 75mm Adapter Bracket
(4) M4 x 6mm Phillips Head Screw
(1) 100mm Adapter Bracket
(4) 10-24 Nylock Nut
(4) 10-24 x 3/8” Phillips Head Screw
Unpack and check contents: Inspect the Flat Screen Table Stand carefully for shipping damage.
If any damage is apparent, call your carrier claims agent.
CAUTION:
The maximum weight to be installed on the FSB018 is 20 lbs (9 kg).
Do not
use a power screwdriver to install screws. Use a hand screwdriver to
prevent damage to your monitor.
NOTE:
For 75mm VESA mounting, perform Step 1 first. For 100mm VESA mounting, perform
Step 2 and Step 3 first.
For 75mm VESA Mounting Pattern
1. Secure the 75mm adapter bracket to your monitor using four M4 x 6mm Phillips head screws
(provided) (see Figure 2).
For 100mm VESA Mounting Pattern
2. Install 100mm adapter bracket using four provided M4 x 6mm or M4 x 10 Phillips head
screws (see Figure 3).
3. Secure the 100mm adapter bracket to the 75mm adapter bracket (see Figure 4).
®Chief is a registered trademark of Milestone AV Technologies. All rights reserved.
Figure 1