Installation Instructions
FCC100
5
ASSEMBLY AND INSTALLATION
Assembling Brackets
1.
Attach speaker (not included) to speaker bracket following
instructions included with speaker.
2.
Place speaker bracket (C) behind hook bracket (B) and
raise the speaker bracket into place behind the hook
bracket. (See Figure 1)
3.
Loosely attach speaker bracket behind hook bracket at the
bottom of the slots using four 10-24 x 5/8" hex head cap
screws (E), four #10 split lock washers (G), and four #10 flat
washers (F). (See Figure 1)
Figure 1
Attaching to Wall Mount
NOTE:
The FCC100 may be attached to the wall mount with
the display already in place, or with the display
removed. Proceed to either
Installing to Wall Mount
with Display Attached
or
Installing to Wall Mount
with Display Removed
section.
Installing to Wall Mount with Display Attached
1.
Pull out bottom of display.
2.
From below and behind the display, raise and hang upper
hook bracket (A) onto wall mount rail. (See Figure 2)
Figure 2
3.
Hang hook bracket with attached speaker bracket onto the
upper hook bracket (A). (See Figure 3)
Figure 3
3
(E) x 4
(F) x 4
(G) x 4
(C)
(B)
2
2
(A)
[Display shown removed for clarity]
Wall Mount
(A)
[Display shown removed for clarity]
Adjustment Slots
7
(E) x 4
(B)
