FCABX18-FCABX36
Installation Instructions
6
Assembly And Installation
The following installation instructions assume that the LBM or
XBM Series video wall has been assembled prior to the point of
installing the rails to the columns. Refer to LBM or XBM Series
installation instructions for details.
WARNING:
The FCABX18-FCABX36 extensions were
designed to be installed to the LBM and XBM Series mounts
ONLY! Do NOT attempt to install these extensions to LVM
Series mounts!
WARNING:
The FCABX36 extensions are NOT compatible
with LBM Series mounts manufactured prior to 05/05/2014!
Column Add-On Installation
NOTE:
If installing FCABX36 to LBM3X3U, LBM1X3U,
LBM3X1UP, LBM1X2UP, LBM2X2UP, LBM3X2UP,
XBM1U or XBM1UP, make sure the 18" extensions
included with the LBM or XBM mount are not installed.
If they are already installed, removed them from each
column prior to installing the 36" extension columns.
1.
Insert one column add-on (A) to each column making sure
holes are lined up on each side. (See Figure 1)
2.
Use 5/32” hex key (C) and six 1/4-20 x 1/2” flat head cap
screws (B) to secure each column add-on (A) to each
column. (See Figure 1)
Figure 1
3.
Install rails and displays to columns following the LBM or
XBM Series Installation Instructions.
(rear view)
(A)
1
2
(B) x 6
(FCABX18 shown with 3 columns)
