FCA530
Installation Instructions
4
ASSEMBLY AND INSTALLATION
Attaching Bracket and Upright to Mount
1.
Lower hanging bracket (C) onto mount rail, placing hooks
over mount rail. (See Figure 1)
Figure 1
2.
Hang shelf upright (B) onto the hanging bracket (C), placing
studs on hanging bracket into slots on shelf upright. (See
Figure 2)
Figure 2
3.
Attach retaining bracket (D) to shelf upright, pressing
retaining bracket against mount rail and tightening, using
four #10 washers (M) and 10-24 lock nuts (K). (See Figure 2)
Assembling Center Assembly to Upright
NOTE:
If installing a taller speaker, proceed to
Optional
Speaker Installations
section.
1.
Partially install two 10-24 x 3/8" Phillips pan head screws
(H) into the top two holes on shelf upright (B). (See Figure 3)
2.
Raise center assembly (A) up to hang it on two screws
inserted in Step 1. (See Figure 3)
Figure 3
3.
Fasten two 10-24 x 3/8" Phillips pan head screws (H) into
the lower holes of center assembly (A). (See Figure 4)
Figure 4
4.
Tighten two upper screws inserted in Step 1.
(C)
Mount rail
3
(K) x 4
2
(C)
Slots
Studs
(D)
Mount rail
(M) x 4
1
(H) x 2
2
(B)
(A)
3
(H) x 2
(A)