FCA501 / 502 / 503
Installation Instructions
6
Adjustments
1.
Loosen two screws on each side of upright. (See Figure 4)
2.
Adjust height of shelf, as necessary.
3.
Tighten two screws on each side of upright.
Figure 4
Installing Components
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located on the FCA501/FCA502/FCA503
does not exceed 10 lbs (4.5 kg).
NOTE:
OPTIONAL
: Slots are provided in shelf for strap (not
included) to hold component in place. (See Figure 5)
Installing Camera
1.
Install 1/4-20 x 3/8" Phillips pan machine screw (E) through
mounting slot on shelf and into hole on bottom of camera
(not included). (See Figure 5)
2.
Route cable from camera towards back of shelf and down
behind the FCA501/502/503. (See Figure 5)
Figure 5
1
2
2
3
(FAC503 shown)
(mount extrusion not shown for clarity)
(FAC501 shown)
Slots provided
for strap
(not included)
1
(E) x 1
Camera
(example -
2
not included)