Installation Instructions
FCA500
5
Adjustments
1.
Loosen two nuts on each side of retaining bracket. (See
Figure 5)
2.
Adjust height of shelf, as necessary.
3.
Tighten four nuts on retaining bracket.
Figure 5
Installing Components
WARNING:
Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located on the FCA500 does not exceed 20 lbs
(9.1 kg).
4.
Put hook and loop squares (E) together to form four
squares.
5.
Remove paper from one side of each square.
6.
Attach hook and loop squares to shelf. (See Figure 6)
7.
Remove paper from hook and loop squares and place
component on shelf, pressing it against hook and loop
squares. (See Figure 6)
8.
Route cable from component (not included) towards back of
shelf and down behind the FCA500. (See Figure 7)
NOTE:
OPTIONAL
: Slots are provided in shelf for strap (not
included) to hold component in place. (See Figure 7)
Figure 6
Figure 7
(Mount rail not shown for clarity)
1
3
2
6
(E) x 4
7
Example
component
(not included)
Strap
(not included)
Cable
8
(Mount rail not shown for clarity)
