background image

Installation Instructions

CTA-111

2

IMPORTANT WARNINGS and CAUTIONS!

WARNING

A WARNING alerts you to the possibility of serious injury or death if you do not
follow the instructions.

CAUTION

A

 CAUTION

 alerts you to the possibility of damage or destruction of equipment if you do

not follow the corresponding instructions.

WARNING

Improper installation can result in serious personal injury! Make sure that the
mounting surface can support a redundant weight factor

five times

 the total weight of

the equipment: if not, reinforce the mounting surface structural members before
installing the mount.

WARNING

Be aware of the potential for personal injury or damage to the equipment if it is not
adequately mounted.

WARNING

The installer is responsible for verifying that the mounting surface to which the
CTA-111 is anchored will safely support the combined load of all attached components
or other equipment.

WARNING

The combined weight of the TV/monitor and all attached components and equipment
placed on the CTA-111 must not exceed 300 lbs. (136.1 kg), the maximum weight
capacity of the CTA-111.

WARNING

Watch for pinch points. Do not put your fingers between movable parts.

CAUTION

Check the unit for shipping damage before you begin the installation.

Summary of Contents for Dual Stud Adapter CTA-111







Reviews: