Installation Instructions
AN2CA1
5
9.
Snap off plastic straps on anchor at wall by pushing side to
side, snapping off straps level with flange of plastic cap.
(See Figure 6)
Figure 6
10. Slide shelf (A) into bracket (B), ensuring that tabs in shelf
assembly hook into attach bracket slots.
11. Fasten shelf (A) to bracket (B) using two 10-24 x 3/8"
Phillips flathead screws (C). (See Figure 7)
Figure 7
12. Place shelf mounting slots over anchors and align mounting
slots in shelf with hole in anchors. (See Figure 8)
13. Insert one 10-24 x 1-1/4" Phillips pan head screw (F) through
#10 washer (G), corresponding mounting slot on shelf (A) and
into Snap-Toggle (J) and tighten until flush against shelf. DO
NOT over tighten! (See Figure 8)
14. Repeat for remaining mounting slot.
Figure 8
15. Attach camera to the shelf using a 1/4-20 x 3/8" Phillips
screw (E) and 1/4" washer (H). (See Figure 9)
Figure 9
16. Cables may be routed through the opening towards the
back of the shelf assembly and through the bracket.
17. Complete the installation following instructions included
with the camera.
Plastic Straps
Drywall
Anchor Metal Channel
Plastic Cap
9
(side view)
11
(C) x 2
Drywall
Anchor Metal Channel
(A)
(F) x 2
12
(G) x 2
(side view)
15
(E)
(H)
