background image

Configuring the Keyboard

 

Configuring Steps 

Operation of the Bluetooth software may vary depending on your personal computer/device. For details, refer to the manuals 

provided with your personal computer. The setup instructions are based on your operating system.   

Case A: Click (Start), then “Control Panel.” 

Case B: Click the “Hardware and Sound” icon. 

Case C: If the “Bluetooth Devices” icon is in the “Hardware and Sound” window: Then go to following D, if the 

“Bluetooth Devices” icon is not visible in the “Hardware and Sound” window: Close the “Control Panel” and go to 

pre-install XP section. 

Case D: Click the “Bluetooth Devices” icon, and verify the contents of the window displayed. If you switch to Classic 

View, double-click the “Bluetooth Devices” icon. 

Case E: Review the Bluetooth Devices windows shown here. If you see window 1, go to the instructions in 

Step (A)

. If 

you see window 2, go to the instructions in 

Step (B)

 

Window 1 

Window 2 

 

 

 

Steps (A)   

1. Turn on the keyboard. 

2. Press the CONNECT button on the bottom of the keyboard. The status light flashes blue. 

3. On the “Bluetooth Devices” window, click the “Add Wireless Device” icon. 

4. In the device list, select “Bluetooth Keyboard” and click “Next.” 

5. Select “Pair with using a code”, type the random code as screen shown and press “Enter” as an end.   

6. When “This device has been successfully added to this computer” window displayed, you can start use this Bluetooth 

Keyboard. 

 

Steps (B) 

1. Turn on the keyboard. 

2. On the “Bluetooth Devices” window, select the “Devices” tab and click “Add.”   

The “Add Bluetooth Device Wizard” appears. 

3. Press the CONNECT button on the bottom of the keyboard. The status light flashes blue. 

4. Select the “My device is set up and ready to be found” check box and click “Next.” 

5. In the device list, select “Bluetooth Keyboard” and click “Next.” 

6. Select “Use a passkey” and type the random code as screen shown and press “Enter” as an end. 

7. When “This device has been successfully added to this computer” window displayed, you can start use this Bluetooth 

Keyboard. 

 

Summary of Contents for KT-1063









Reviews: