background image

38

39

3

 Position the child restraint upright on a 

flat surface.

4

 Hold both armrests and pull up to 

release the top part of the booster seat.  

5

 Release the fabric cover by 

unfastening the 5 fabric cover hooks 

located on the underside of the top part 

of the seat.

6

 Remove the fabric cover from the top 

part of the seat.

REMOVING FABRIC COVERS

 

 Be sure to lift fabric covers 

carefully around all red belt 

guides.

3

4

5

6

REMOVING FABRIC COVERS

Replacing Fabric Covers

 

 Be sure to fit fabric covers carefully around all red belt guides.

Repeat 

Removing Fabric Cover

 steps in the reverse order, ensuring that 

the fabric cover fits onto and adheres correctly on the frame, in particular 

in the red areas, which correspond to the belt guides.

 

Check that the top and 

lower parts of the seat are 

correctly locked to each other 

with the small reference 

circles (located on the black 

plastic) fully aligned

to the CLOSE position. 

Pull on booster seat Base 

to make sure Base is locked 

securely.  Make sure there 

are no gaps between the top 

and bottom parts.

The child restraint must never 

be used without the fabric 

cover. It could be dangerous 

for your child.

Summary of Contents for KEYFIT STRADA























Reviews: