Age: from 0
• Please read these instructions carefully before using the toy and keep for future reference.
• The toy runs on 2 x AAA 1.5 volt batteries, (not included).
WARNINGS
Before using the product remove and dispose of any plastic bags and any other packaging
•
(e.g. fasteners and fixing ties etc) and keep them out of reach of children. Suffocation
hazard.
Check the toy regularly for signs of wear and damage and to ensure that it is intact and
•
assembled correctly. Should any part be damaged, do not use the toy and keep it out of
reach of children.
It is not safe to use the toy on raised surfaces: e.g. tables, chairs etc.
•
Never leave the toy on surfaces which are not perfectly level.
•
The toy must not be dropped or knocked harshly.
•
The product must not be repaired or modified by the purchaser.
•
In particular, never attach ties or straps to it.
•
The toy must only be opened and closed by an adult.
•
This toy must only be used under adult supervision.
•
Do not change the play positions (nest, gym, activity mat) when the baby is inside the
•
product.
Never leave your child unattended whilst playing with the toy.
•
Do not use the toy for more than one child at a time.
•
Never lift the toy up when the child is inside.
•
Never use the toy bar as a carrier handle. This could damage the frame.
•
T
•
he toy was
NOT
designed specifically for children to sleep in it. If your child needs to rest,
it is recommended to move him to his cot or bed.
The netted fabric aims to create a comfortable environment for babies. This fabric is not
•
designed to protect babies against UV rays.
INTRODUCTION TO THE TOY
FUN TRAVEL CUDDLER & GYM
with 3 operating modes:
CUDDLER
- a comfy environment which helps babies to relax;
GYM
- babies can play and touch the hanging toys whilst lying on their back on the padded
mat;
ACTIVITY MAT
- babies can play lying on their tummy and discover all the tactile and sound
activities on the hanging toys.
The product can then be folded away into its own practical travel bag, ideal when travelling.
HOW TO ASSEMBLE THE TOY
When you buy the toy it is folded up like a carrier bag.
1. ASSEMBLING THE TOY IN GYM MODE
1. Position the bag on a flat surface (A, Diag. 1).
2. Open the zip (B, Diag. 2) all the way round until it unhooks completely (Diag. 2.1)
3. Open and place both sides of the back on a flat surface (C, Diag. 3 and Fig.3.1).
4. When opening the toy, check that the side buttons (D, Fig. 4) snap one at a time into the
correct position. A “click” will be heard when it is in the right position.
5. Lift the activity panel arch (X1) to a vertical position, as indicated in Diagram E-1.
6. Fix the activity arch to the arch support (X2, Fig.E-2), threading the strap (X3, Fig. E-2)
through the slot and fix it to the arch using the Velcro fasteners.
7. When the gym is assembled correctly, it should look like the one shown in Diagram
E-3.
2. ASSEMBLING THE TOY IN CUDDLER MODE
1.
Completely unroll the netted fabric stored inside the lining (Diag. F-1), attach it to
the activity arch and use the velcro fasteners on the arch to fix it in place, as seen in
Diagram F-2.
2.
When the cuddler is assembled correctly, it should look like the one shown in
Diagram F-3.
3. ASSEMBLING THE TOY IN ACTIVITY MAT MODE
3.1 Remove the netted fabric from the frame comprising the activity arch and arch
support, folding it away inside the lining as seen in Diagram G-1.
3.2 Release the strap that fastens the arch support to the activity arch (Diag. G-2) and
accompany the latter with your hand into a horizontal position, as seen in Diagram
G-3.
3.3 Place the arch support under the outer lining, as seen in Diagram G-3.
4. HOW TO FOLD UP THE TOY
4.1 Lift a section of the toy upwards to a vertical position and, at the same time, press the
buttons on the side of the arch structure one at a time, making sure they all remain
tightly closed (Diag. H-1). Fold both sides together as seen in Diagram H-2.
4.2 Now zip it up all the way round to create a bag as before (Fig. H-3).
5. REMOVING AND ATTACHING THE HANGING TOYS ON THE ACTIVITY ARCH
5.1 Removing the toys: open the velcro fastener (Diag. I – 1), unthread the strap through
the activity arch slot and remove the hanging toy. Repeat this procedure for the
second hanging toy. The hanging toys can now be used a rattles.
5.2 Attaching the toys: thread the strap through the hanging toy hook (Fig. I – 2). Now
thread the strap though the slot on the activity arch (from the bottom upwards) (Fig.
I – 3.1) and use the velcro fastener to fix it in place (Fig. I – 3.2). Adjust the hanging
toys to the right height for your baby.
HOW TO USE THE TOY
Switching it ON and Off
• To switch the electronic panel ON (Diag. L), move the switch (L.1) from the 0 position to the
I position (Relax) or II (Fun) position according to the play mode desired.
• To adjust the volume level, move the switch (L.2) to <)) (low) or <))) (high).
• In order to avoid using up the batteries for no reason, it is recommended to switch off the
toy by moving the switch to OFF (0) when not in use.
2 PLAY MODES:
1. RELAX
- move the switch from the 0 position to the I position; the toy will automatically
start playing soft music and light effects to soothe the baby. The hanging toys do not
trigger the sound effects and tunes when the toy is in this mode. The toy will switch off
automatically after 10 minutes. To start it again, move the switch to the play mode desire.
It is recommended to use this play mode when the toy is being in nest mode;
2. FUN
- move the switch from the 0 position to the II position; a tune will start playing
automatically. Every time your baby touches the hanging toys or the arch with his hands,
this will trigger different sound effects along with the tunes. When the tune finishes, the
baby can make it play again by touching the hanging toys or the activity arch. The toy will
automatically switch to stand–by mode if the toy is not touched for over 60 seconds. Simply
touch the hanging toys or the arch to enable the toy activities again. It is recommended to
use this play mode when the toy is being used in gym and playmate mode
.
HOW TO FIT AND REMOVE THE REPLACEABLE BATTERIES
• To replace the electronic panel batteries: loosen the screw on the battery compartment
cover (M, Diag. L) on the back with a screwdriver and remove the cover; then remove the
flat batteries and fit new ones, ensuring that the battery polarity is correct (as shown on the
product), close the battery compartment cover, and tighten the screw firmly.
WARNINGS
Batteries must only be fitted by an adult.
•
Always keep batteries and tools out of the reach of children.
•
Always remove spent batteries from the toy to avoid the danger of leakage from the battery
•
damaging the product.
Always remove the batteries if the product will not be used for a long period of time
•
Only use alkaline batteries of the same type or equivalent to the type recommended for the
•
correct function of this product.
Do not mix new and old batteries.
•
If the batteries happen to leak liquid, replace them immediately, making sure you clean the
•
compartment beforehand; wash your hands thoroughly if you come into contact with any
such liquid.
Remove the batteries from the toy before disposing of the product.
•
Do not burn or dispose of old batteries into the environment. Dispose of them at an
•
appropriate differentiated collection point.
Do not mix alkaline, standard (carbon - zinc) or rechargeable (nickel-cadmium) batteries.
•
This product is not designed for use with lithium batteries. WARNING: Improper use could
•
be hazardous
Do not short-circuit the battery terminals.
•
Do not attempt to recharge non-rechargeable batteries: they might explode.
•
The use of rechargeable batteries is not recommended as the toy may not work properly.
•
If using rechargeable batteries, remove them from the toy before recharging them. Batteries
•
must always be recharged under adult supervision.
CLEANING, CARE & MAINTENANCE OF THE TOY
The electronic panel should only be cleaned using a soft, dry or moistened fabric or
•
microfibre cloth to avoid damage to its electric circuit. Do not clean the toy with detergents
or solvents.
To guarantee extra hygiene for the 2 hanging toys (the plastic parts only) use a cloth dipped
•
slightly in a sterilising liquid diluted with water using standard cold sterilising quantities. Do
not use pure undiluted sterilising liquid. Do not place in the dish-washer
Use a soft cloth dampened with water to clean the frame.
•
The play mat is machine washable using a gentle cycle for delicate fabrics. It is recommended
•
to rinse the toy thoroughly to eliminate all traces of detergent. Do not bleach and allow it to
dry at a distance from heat sources. Hang the play mat up to dry.
Protect the toy against heat, dust, sand, humidity and water.
•
Textile composition
Play mat: 50% polyethylene - 50% polyester
External parts: 100 % polyester
Play mat wash symbols
Wash at 30° max
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
Hang the play mat up to dry.
Made in China
92503.L
.1
46
000901
100
07
0
