Chicco E-Motion, Owner'S Manual

Page: 7 / 12

12 13
8A. To use the Power Cord (F), make
sure USB end of the Power Cord is
attached to the Adapter.
8B. Insert the Power cord into the
back of the Seat Base, as shown.
Then plug the adapter into electrical
outlet.
8
B
How to use Glider
8
A
How to use Glider
9. The Glider has a function panel on
the side of the base, as shown.
Music (top button):
Press the button to start playing the
music cycle. Press it again to stop/
restart the music.
Volume/Cycle (middle button):
Press and hold the middle button
to change the volume of the music.
Volume will cycle through 3 settings:
low > medium > high > low, etc.
Release the button when the desired
volume is reached. Or, press the
button once to select a different
song. Keep pressing the button to
cycle through the songs, until desired
tune is reached. The song sequence
will restart from this point.
Timer (bottom button):
Press button once when the front
button light is lit. The light will start
to blink indicating timer mode is
active. The music and glider
function will be active for 10 minutes.
A movement from the baby or a tap
on the seat will activate another 10
minute cycle (motion only). This can
be repeated twice for a total of three
10 minute cycles.
9